I have been in the professional carpet and upholstery cleaning industry for over ten years and I have seen it all. Milk, blood, and mud, you name it I have cleaned it.
There are many products you can pick up at the local Walmart or grocery store that work great. The only problem is that they are usually vague about the use of the product.
Well I can make your life a little easier by suggesting some more safe and color safe ways to clean it up.
First thing to know is that if you have a red stain on any thing, please do not try to get it out your self. Leave that one to a pro. There are procedures and very effective solutions that your local carpet cleaning company can use and save you from ruining your investments. Remember that red is the hardest stain to remove except for the carpet cleaner. He is trained and equipped to remove them safely.
Now for every thing else there is an effective and cheap way to clean spots on your carpet and upholstery. If you are buying products that work for you then you are not reading this now so let me tell you what works.
Go to your local Auto Zone or auto parts store and pick up auto upholstery and carpet cleaner in the can. Tuff Stuff is one of my favorites. The cleaners that come in the can are almost all foaming cleaners, which make your job a lot easier. The foam will penetrate the fibers on contact and as it foams it releases and suspends the soils and stains. You may need to gently scrub the areas with a soft bristled brush or towel.
TIP: Only use white rags or towels when cleaning carpet and upholstery to reduce the risk of color transfer.
TIP 2: You can use these foaming cleaners to clean entire upholstery (sofa, chair, ottoman, etc… even if it states dry clean only.
TIP 3: Always test product first on a hidden area to save your self embarrassment. You know, just in case.
TIP 4: If you need a pro or more info go to my site (see byline) for more help.
Published At: www.Isnare.com
Permanent Link: http://www.isnare.com/?aid=13741&ca=Home+Management
Dry cleaning carpet machines clean a carpet without using a liquid detergent. It is usually used to clean carpets that are made of fine fibers, because it prevents moisture build up and damage to the carpet. The solution used in a dry carpet-cleaning machine is a powder-based substance that is sprinkled or sprayed on the carpet evenly, left to dry and then vacuumed to remove the dirt.
Any time you use a dry carpet cleaner; you should always vacuum your carpet first. If there is a wet spill on the carpet, make sure that it is dried before using the machine. A wet spot can prevent the machine from working properly and prevent the cleaning solution from working properly. The whole idea of a dry carpet cleaner is that it uses low moisture to clean. The cleaning agent is only a 10% water mix. This eliminates the problem of over wetting the carpet and there is no need to worry about shrinkage, buckling or mildew. The dry carpet cleaning method works much faster than hot water cleaning, and the detergent are environmentally safe. Dry carpet cleaning is one of the safest ways to clean a carpet. Dirt is sucked into the machine and the carpet is cleaned in an efficient manner with less of a mess. The cleaner has various attachments including brushes, foams, sprays, powders, etc. It is safe to use on most fiber carpets and it is extremely powerful. The circular motion of the vacuum tank extracts the toughest dirt and is very effective in high traffic areas like living rooms and dens.
Carpet Cleaning provides detailed information on carpet cleaning, carpet cleaning supplies, carpet cleaning machines, carpet cleaning equipment and more. Carpet Cleaning is affiliated with Berber Carpets.
Article Source: http://EzineArticles.com/?expert=Jason_Gluckman
We hear allot about Berber carpet but have you ever wondered where they came from? Berber carpet was named after handmade bulky wool that was textured and used by a tribe in North Africa. The tribe was called the Berber tribe. Now isn't that convenient. The Berber carpet of today follows much of the tradition of the Berber tribe using flecked bulky yarns to create beautiful carpets. Here are 10 reasons to buy Berber carpet over other carpet choices.
1. Unique
The flecked looped yarns used to make Berber carpets provide unique stylish carpets that have a uniqueness that makes a Berber carpet easily identifiable.
2. Choice in Loop Size
You can get various loop sizes in Berber so there is a size for every room and decor. From large rather knobby loops to small tight loops. There are several industry choices including cut and loop designs, multi level loops, and level loops.
3. Hypo-allergenic
Berber is the perfect choice for anyone with allergies or children. It is made from wool so it is non toxic and non allergenic and it stops bacterial growth right in its tracks.
4. Comfortable
The manufacturing process created wool loops that have millions of air pockets in them so the carpet has a nice cushiony feeling when you walk on it. It also has an insulation factor because of the weave which helps regulate the temperature of the room.
5. Hardy
Berber is one of the most durable and easy carpets to clean. Stains are easily lifted and it takes a lot of miles on the carpet for it to show any wear. Berber is well known for its longevity while still looking as new as the day it was installed. It hardly ever shows footprints, and it doesn't show the lines from the vacuum cleaner. The only thing you need to watch is that you don't snag it and damage it.
6. More Affordable
Now there is a little irony here. Pure wool carpet and it's cheaper than nylon, olefin, or any of the man made products while at the same time outlasting them and looking new for much longer. Berber is one of the most affordable choices in carpet and yet it looks richer than many of the other choices available to you.
7. Color Choices
Color choices are mixed and varied and include earthen or neutral colors, dark colors, and even pastel colors. Not only are there plenty of colors to choose from there are plenty of patterns to choose from. Because of the way the carpets are made depending on how the yarns are twisted and the pile density will depend on the look and pattern of the finished rug. Berber offers more choices than almost any other type of carpet.
8. Hide Sub floor
Because of the density of Berber carpet you can easily hide irregularities in the sub floor without spending an arm and a leg to repair or replace the sub floor. This makes Berber very cost effective especially in older homes that are having the rugs redone.
9. Variety of Grades
Just like other carpets you can choose a variety of grades which determine how plush the carpet is. Berber is available in a variety of grades and they even have a product designed to go right over concrete.
10. Economical
Besides being one of the most economical carpets to buy Berber is also one of the most economical carpets to have installed. Because it is an easy carpet to lay you can often find installation at less per square foot than other carpets.
So if you want to add a richness and quality to your home I've given you 10 reasons to buy Berber carpet. So what are you waiting for?
Published At: www.Isnare.com
Permanent Link: http://www.isnare.com/?aid=23324&ca=Home+Management
Do you want cheap carpet that you can easily install yourself? Well, I once carpeted a large bedroom for a total cost of about $12. You read that right, and no, the carpet was not used carpet. I did it with carpet samples.
I bought them for 25 cent apiece at a closeout sale, and it took 36 squares of carpet to finish the room. The only other supplies I used were the staples, which cost about a dollar. Normally, you might pay a dollar each for squares of carpet. I found them available for half that just a few weeks ago, but in any case, this is cheap carpet.
This is an unusual style, though, and you may have to consider the resale value of your home. The bedroom I carpeted this way was in a rental mobile home, where cheap and unusual styles are the norm. Ordinarily, you will want to save this trick for areas like basements, playrooms, and maybe a children's clubhouse. Still, it doesn't look so bad - actually it looks just fine if you mix the various colored squares of carpet well.
In a children's playroom, the multi-colored floor is perfect. It is cheerful and colorful, and if a spill stains one of the carpet squares, you can easily pull it up and install a new one in its place. This is a nice advantage of carpeting a room this way.
Installing Cheap Carpet
The only things you will need to carpet a room with carpet samples or squares is a carpet knife and a staple gun. 5/8-inch staples have worked best for me. Begin at any corner. Just put the piece in place and staple it in two or three places along each side. Wiggle the stapler head down between the fibers, or between the border and the fibers, and the staples will usually be well-hidden.
When carpeting a basement floor, you can use carpet tape instead of staples. In either case, this is best done where padding isn't too important. Of course, you can use padding too, if you don't mind the complications, but without it, this is pure simplicity.
You might want to lay out the pieces first, to decide where each will go. When you come to walls, heating registers, and other obstacles, you can easily cut the pieces to fit. If you make a mistake, it cost you perhaps a dollar. Just start over with a new piece.
Before you start, estimate how many pieces you'll need, and call around to find a carpet store that has enough samples for sale. The carpet samples at different stores range in size, but are usually at least 18 by 18 inches. Using pieces that are all the same size is the easiest way to go. Even at a dollar, this makes it less than 50 cents per square foot to carpet a room. That's cheap carpet!
Published At: www.Isnare.com
Permanent Link: http://www.isnare.com/?aid=47764&ca=Home+Management
Do you have a carpet in your car that need attention? If you do then you need to read this article. It will give you some tips on cleaning your automobiles interior. Keep reading and have a clean car in no time.
With auto interiors the trick is to not over wet the carpet. Cars interiors are loaded with electronics and wiring. The last thing you want to do is get theses things wet. Use caution to not use too much cleaner. So to begin with auto carpet cleaning you need to first thoroughly vacuum your carpet. Take your time and do a thorough job, The more soil you remove in the dry form, the less cleaner you need to use later. After you have vacuumed the carpet you can begin the actual cleaning process. Get a can of foam carpet cleaner available at all auto parts stores. Follow the directions on the can for application. Generally you will spray the foam cleaner on the carpet and brush it in. Next you will get a clean cotton towel and wipe up the carpet with the towel. Be gentle and do not agitate the carpet too much. Finally allow the carpet to dry and thoroughly vacuum it to remove the dried carpet shampoo.
That is all there is to it. Carpet in autos is actually quite easy to clean. Since it is usually an olefin carpet it typically also cleans up well. If you would rather not clean it yourself call a local carpet cleaner and see if they offer interior cleaning.
Learn more information on this and your Austin carpet cleaning company at the authors website.
Article Source: http://EzineArticles.com/?expert=James_C
When selecting carpet, one must consider many aesthetic as well as technical issues; and with over one hundred thousand styles and colors released by manufacturers every year, selecting the carpet that matches your needs can be a daunting task.
Carpet is available in a myriad of textures, constructions, colors and designs, opening the doors to countless interior design possibilities. The combination of color and texture, will compliment the décor of both casual and formal environments, while bringing continuity to the overall design of the rooms.
The most important factor to consider when shopping for carpet is the amount of foot traffic prevalent in the area in which the carpet is to be installed as well as the areas intended use. Carpet construction and texture are the key aspects when selecting a carpet for a specified area and use.
Polyester, nylon and olefin are the most widely used fibers in the manufacture of carpet, each displaying certain inherent characteristics which lend themselves well to distinct applications. Although the most expensive of the fibers, nylon is the softest and most resilient, making it suitable for all rooms in your home, including high traffic areas.
Polyester is less resilient than nylon, but is more cost effective and offers a higher level of stain resistance, making it an attractive option for areas such as bedrooms and dining rooms that are not subject to high foot traffic.
Olefin fibers are solution dyed, resulting in a highly stain resistant carpet that can be cleaned using a bleach and water solution, without the loss of color. Unlike the other fibers, olefin is fade, mold and mildew resistant, resulting in a carpet that performs well in indoor/outdoor areas. Olefin is however not very resilient and therefore should only be considered in a berber construction.
Carpets are available in either a berber or plush construction. Berber carpets are constructed with a continuous level loop, while a plush carpet is constructed of loops that have been sheered, resulting in the strands standing upright.
Berber carpets do not matt and crush, due to their level loop construction; however they are harder underfoot, uncomfortable to sit or lye on, and can be damaged by pets with long nails. Berbers are very well suited to high traffic areas such as walk ways, living rooms and entrance halls, however their hard texture makes them a less attractive option for bedrooms.
Plush carpets are softer to walk on and offer better sound and thermal insulation, however they tend to matt and crush when subjected to heavy foot traffic. The use of a nylon fiber coupled with a tight low pile construction will limit the matting and crushing, due to the resiliency nature of the nylon fiber and the additional support gained from a tight construction.
Carpet warranties range from 5 to 30 years, and as general rule, do not cover stairs and are not transferable. Most warranties require the installation of new carpet padding at the time of installation in order for the warranty to be valid.
Following the manufacturers maintenance instructions and using only approved cleaning chemicals will ensure that your carpet will perform for years and years.
Published At: www.Isnare.com
Permanent Link: http://www.isnare.com/?aid=47448&ca=Home+Management
New freshly installed carpet everyone love that new carpet smell, after time has passed the new smell vanishes. Most people say the answer to this problem is to clean the carpet. It is very important for you to know that carpet cleaning is more complex than it sounds. It is important to know the basics to know how to care for you new carpet.
The most important tip for caring for your carpet is vacuuming. Your carpet will should longer and stay clean longer if you owe a good quality vacuum. This is important because dirt acts like sandpaper to your carpet fibers. If not remove with a good vacuum you will start seeing wear in your carpet.
To keep this new fresh looking carpet you shall be aware for different types of cleaning methods. A method known as wet cleaning eliminates those greases and oils trapped in your carpet. This is the most used type of carpet cleaning. Another type of carpet cleaning known as shampooing is a cleaning soap spread on the carpet by rotary type brush machine which is forced into the fibers. Usually within thirty minutes your carpet can be vacuumed to remove the dirt and grime.
It is important to remember when you are taking care of newly installed flooring there are many cleaning methods available. Each method has benefits, and can give great results when perform correctly. Which ever method you choose to use, be sure to dry the carpet.
Drying the carpet stops the carpet from smelling and mildewing. Frequent care for your carpeting, the longer it will last.
Brian Ward author of information articles, on carpet cleaning tips. Visit his website at http://www.carpetcleaninghelp.com
Article Source: http://EzineArticles.com/?expert=Brian_Ward
If you have wrinkles in your carpet then it is time to stretch your carpet. A simple way to know if it’s time to stretch is go to the center of the room and grab the carpet. Try to lift it up and then let go. If the carpet does not snap right back into place then you need to have your carpet re-stretched. It is important to do not only because it is an eye soar but also will actually decrease the life of the carpet.
To repair this, the carpet must be re-stretched. A carpet installation company can do this by coming out and removing the carpet from the tacks on the end and then stretching the carpet out. Often times the carpet must be cut at the edges to remove the wrinkles. This process can be just as intensive as first installing the carpet. The average cost in many areas is around .30 cents a square foot to as high as .75 cents depending on whether the company has to move any furniture. If you are willing to move it all you’re self it could cost half as much.
For more carpet cleaning tips or to look up your local BBB carpet cleaning members please go to www.carpetcleaningheadquarters.com.
http://www.carpetcleaningheadquarters.com has been cleaning carpets for many years and now have a strong web presence. We are proud to bring your or tips of the trade as well as providing BBB member listing of carpet and upholstery cleaners in your area.
Article Source: http://EzineArticles.com/?expert=Jacob_Erdei
