A lot of people know that carpets feel comfortable to lie-down on and provide a nice texture for your feet to walk on. However, you may not be aware of the fact that having a good carpet pad underneath your carpeting makes all the difference in the world in determining whether or not your carpeting feels soft and comfortable or hard as a rock. There are unquestionably some things you should know about your carpet pads in order to ensure that your carpeting provides you with a maximum level of carpet.

First of all, think about carpets that are void of all carpet padding. If you laid down carpeting on a hard floor with no pad between the carpet and the floor, there are a number of unfavorable things that would happen. Most likely, you would quickly notice that your carpeting does not feel comfortable to walk on, let alone lie-down on. There are some carpets designed for little or no padding underneath, but these are not types that are meant for your home. In fact, carpets without padding have are comparable in hardness to hardwood floors; they are both extremely tense.

If you buy a normal living room carpet without the carpet pad to go under it, then it would not take much walking on in order to really wear-out the carpet. Your carpet would wear-down very quickly because it would be rubbing directly on the cement underneath. In order to ensure that your carpet lasts as long as possible, it is recommended that you buy the proper-fitting carpet pad to accompany it.

If you want a carpet that feels comfortable to your friends and family, you will need to get a durable set of carpet pads. The purpose of installing carpet pads along with your carpet is in order to increase the overall durability of your carpet as well as to minimize carpet damage and maximize the comfort-level of people who are walking on the carpet or want to lie down on the carpet. Choosing a good carpet pad is also helpful because it serves as a buffer that allows your furniture to be set on top of your carpet without causing your carpet to damage.

If you are currently looking for a new carpet, you should always make sure that you are able to find good-quality carpet pads to go along with it. You don't want to ever make a big investment in new carpeting only to find out that you are not able to find any good carpet padding to put down before you install it. Always ask the carpet-company for good quality carpet padding to go along with it. Most people are so focused on how their carpet looks when they buy it that they completely forget about getting good carpet pads. They usually opt for having the standard carpet pads installed with their good looking carpet. If the standard pads are of relatively low quality, the carpeting is surely going to wear out much more quickly than it would have if you had remembered to pick out a better carpet pad.

Tag : carpet,carpet pad,protect

It seems it is that time of year again. We always dread it. It's time to clean the carpeting. Well, I have a few tips for you that will hopefully make your carpet cleaning chores a little less of a head ache.

The first thing is to gather all the chemicals tools and equipment you may need. Here's a list of the things I gather to get the job done as easy as possible.

  • A carpet steam cleaner
  • Carpet cleaning chemicals and shampoos
  • A small hand held scrub brush
  • A pail and sponge
  • Gloves and a respirator

A carpet steam cleaner

Getting a good quality carpet steam cleaner is essential to the cleaning process. Make sure you have one that is of good construction. It is very frustrating to keep fixing a machine that keeps breaking down throughout the process of trying to get the carpets clean.

A good carpet steam cleaner should also provide enough suction to pick up most of the water put down in the process. Your carpeting should be damp, not wet when the entire cleaning process is done. If your carpets are wet it will take a very long time to dry and it is also an indicator that the carpeting is not as clean as it could probably be.

The last thing to look at is the scrubbing action. Most new models of a carpet steam cleaner either use a rotating roller scrub brush or spinning scrubbers. I believe either is good, but I prefer the spinning brushes, because they seem a little easier to remove for cleaning. If you have pets that shed, you will probably be cleaning them several times throughout the project.

Carpet cleaning chemicals and shampoos

There are several good shampoos on the market, depending on the type of carpeting and how dirty it is. There are many different brands and options out there, so I really can't give a good recommendation as to which one is best, but I would start by reading customer reviews.

There are some things to consider that is being considered more and more in the cleaning industry and that is the harmful chemicals that are used many of the traditional carpet steam cleaner shampoos.

The two main ones to be conscious of are Perchlorethylene (PERC for short) and Naphthalene. PERC as a popular solvent used in carpet cleaning solutions and in larger exposure amounts can cause dizziness and nausea, can lead to kidney and liver damage, and is possibly linked to cancer. Naphthalene is also commonly found in carpet cleaners and has been known to harm the kidneys and liver as well as the central nervous system. Both of these chemicals are harmful if the fumes are inhaled; not to mention bad for the environment.

Becoming very popular on the market are nontoxic alternatives that do not contain these chemicals. Make sure you know what is in the products you are buying if you are concerned about possible health problems through exposure to these chemicals.

I would also recommend a good spot cleaner in a spray bottle to help remove stubborn stains.

A small hand held scrub brush

The small scrub brush is to help loosen stubborn stains that the machine has a hard time tackling. I would definitely recommend going over the entire area with the machine before determining the need for scrubbing. Getting on your hands and knees to scrub out a stain is not much fun, so I would avoid it if at all possible.

A pail and sponge

A pail and sponge is usually necessary to clean up small spills and messes.

Gloves and a respirator

If you do decide to use traditional carpet cleaning chemicals, a pair of rubber gloves and a respirator should be used to protect you as much as possible from exposure.

Getting Started

You should start by retreating any areas that you think will be a problem. Coffee or juice spills, heavy traffic areas, or pet mess areas are all potential areas for pretreatment.

One thing to note about pet messes; there are many good enzyme based cleaners that can be purchased at your local pet store that are great to clean pet messes. This usually involves cleaning the area several days or even weeks ahead of time to allow the enzyme formula to work. This schedule should be planned around the date you need to clean the carpet by.

If you really think some areas may be a problem, a little scrubbing with the brush to help release some stains would not hurt.

Be sure and read the mixing direction on the back of the product you purchase. A solution that is too diluted will not clean, and too much soap will leave your carpeting full of suds and will not extract properly.

The nice thing about many new carpet steam cleaner machines on the market is their ability to mix the correct amount of soap right onboard the machine, so you don't have to worry about measuring.

Cleaning furniture and small rugs

I would recommend cleaning furniture, drapes, and small area rugs first. Any over spray from cleaning these will end up on the carpeting and will be extracted later anyways.

Always check labeling before cleaning furniture to make sure that it can be cleaned with water. Also steer clear of soaking down furniture too much with the solution. Because furniture is contoured and uneven it is difficult to create a good seal on the extraction wand which can limit the water removal.

Be prepared, furniture can seem to take quite a while to dry.

Cleaning carpeting

Most carpet cleaners on the market today require a two step process to the cleaning action. Since the solution sprayers are located behind the agitating brush and the extraction head, the solution needs to be laid down first in a forward sweeping motion. Pushing down slightly and squeezing the dispensing lever, dispense the solution along the desired path you wish to clean. Then, following the same path in the return stroke, release the solution dispensing lever and pull the machine back to the point to where you first started the stroke.

The extraction head is in front of the agitator, so on the return stroke the fibers in the carpet are being scrubbed, then the excess water is being sucked up by the extraction head.

Many carpet cleaners intentionally make the front of the extraction tool clear so you can view how mush dirt you are pulling out of your carpeting.

Some people believe it is necessary to clean the carpet in two different directions to make sure that the carpet fibers are being scrubbed from various directions to insure to extract as much dirt from the carpeting as possible. That is really up to you how clean you really will need your carpet.

Caution! Carpet cleaning problems

Here are a couple things to really look out for when using a carpet steam cleaner. especially for the first time.

  • Over soaking your carpeting- Be careful not to over soak your carpeting. While getting caught up in the frenzy of getting you carpets as clean as you would like, you may want to go over spots several times until the water extracted will virtually run clean. The problem with this can sometimes be getting too much water soaked into the carpet pad which can then easily mold or mildew. Depending on several conditions that vary from house to house, drying can be a problem for some and not others. I would suggest, if you would like to get your carpets as clean as you can, breaking up the project into two different weekends to allow the carpet ample time in between to dry.
  • Loose fibers in the carpet- Watch out for loose fibers in the carpet. These can get snagged on the rotating brush roller and rip apart you carpet; or clog and damage the roller on your machine. If you know you have loose fibers in your carpet the easiest solution is to take a scissors and trim off the loose fibers as close to the base of the carpet as possible. This will hopefully prevent any snagging of the fibers on the roller.
  • Have a plan of attack- Planning your route or order of carpets can save some headaches at the end of the project. Carpet cleaning professionals have done this enough times that it becomes second nature, but you should plan your route so that you do not need to walk across already cleaned carpeting until it is completely dry. I usually plan my base of operations as the kitchen and work the entire project to end in the kitchen.
  • Cleaning your carpet steam cleaner- It seems one of the biggest problems I see with machines breaking down or not working after the first or second use is not taking the time to properly clean out your machine after use. It is very important to flush out the entire machine with clean water to ensure that no soap ends up clogging the solution discharge system, especially the discharge nozzles. Many manufactures view lack of cleaning as neglect and are hesitant to warranty any mechanical problems that arise because of it.

Carpeting is a nice way to decorate or make your home feel cozy and warm, but an occasional deep cleaning is necessary to keep it looking beautiful. Hopefully by following the list of above steps, your carpet cleaning experience will be a little less aggravating if not even a little pleasant.

Tag : carpet,steam cleaner,cleaner

A patch is one of the most common types of repairs that we do. We use a carpet patch to solve several types of carpet problems where small to mid-sized portions of wall-to-wall carpet have been damaged. People usually call us to patch their carpet when other methods to restore their carpet won't work.

Common causes of carpet damage that require this type of carpet repair include carpet burns, carpet stains, carpet tears, carpet holes, pet damage (Bad Kitty!), and remodeling as well as worn traffic paths.

We remove the damaged area, and replace it with an identical piece of carpet. When done correctly, it's normally, but not always invisible to the eye. Depending on the type of carpet you may be able to see the patch, but it will almost always look far better than what we started with.

Reasons why your carpet patch may not look as good as you'd like

• The patch is a different color due to the original carpet fading.

• The patch is new and the area where it's going is old and worn.

• The patch has a gap or overlap in the seam.

• The carpet is running the wrong direction.

Start with the essentials: carpet anatomy

The greater the damage, the more complicated the repair, so it helps to understand what exactly your carpet is made of so you can assess how far the damage has gone.

Every carpet has several layers below what we can see with the eye. That top layer, which comes in various colors, weaves, heights, materials, and densities, (and which is the fun part to pick out when you go carpet shopping) is called the pile. The pile is made from many different materials: nylon is the most common encountered in both commercial and residential carpet repair, because it is relatively stain- and heat-resistant and doesn't crush easily.

Most people are familiar with the fact that padding lies below the carpet, which helps give it its comfortable feel when you walk on it. This is the bottom layer. Common types of padding include foam (cheap), rebond, frothed foam, slab rubber, waffle rubber, fiber (such as jute, recycled textiles, synthetic fibers, etc.), and in some cases special Berber padding.

Between the pile and the padding is the backing, which is made of two layers and holds the fibers together so the carpet doesn't fall apart. When the carpet is manufactured, needles are used to push the fiber through the primary backing. It's then sealed against the secondary backing with very strong adhesive to keep everything in place.

Once you're familiar with how your carpet is constructed, it's easier to envision how patching works, even if you've never done it before. These are the basics of your carpet's anatomy, and should help you in assessing how far down the damage has gone, which is an important step in carpet repair and carpet patching.

#1 Carpet Patching Requirement: Carpet Patches!

Just as important as removing the damaged carpet is replacing it with well-matched good carpet. There's a few different ways to find a fresh carpet patch:

· In ideal situations, the new carpet patches come from spare scraps left over from the original installation. Always save the scraps!

· If you don't have any leftover carpet from the installation we may be able to steal some carpet from a closet, beneath a radiator or from under a piece of furniture that you never move. (Now you'll never move it for sure.)

· If your carpet is a relatively common style, a nearby retailer may have a perfect or near-perfect match that you can purchase. (The chances of finding a perfect match are somewhere between slim and none.)

· If you need to patch a significant area that matches the rest of the house (such as several steps in a stairway or a hallway, one great carpet patching alternative is to re-appropriate matching carpet from another room, such as a bedroom. Re-carpeting just that one bedroom means the hallway/stairway still matches the rest of the house, and costs a LOT less money than replacing the carpet for whole common area.

Basic Steps of Carpet Patching for the novice.

1. Removing the damaged carpet: Start by using a straight edge and a row finder. An ice pick or a Phillips screwdriver can be used instead of a row finder. Place the straight edge on the carpet with the groove side down. Use the row finder to separate the nap. Do this by dragging the point of the row finder across the carpet up and down and against the edge of the straight edge.

2. Use a slotted blade knife with a fresh blade. You can use a slotted blade knife (butted up against the straight edge to cut through the carpet without cutting through too much of the nap if you used the row finder properly. The more nap you cut off, the worse the carpet patch will look.

3. Choose a scrap of carpet that's leftover from the original installation for the carpet patch. If you don't have any leftover scraps of carpet then you'll need to remove a piece from a closet or from under a piece of furniture. Some people try to find a piece of matching carpet at a carpet store but it's nearly impossible. On occasion we will have the customer buy some carpet from a carpet store that is very close to matching. We then take carpet from a closet to do the patch with and use the new carpet in the closet.

4. Determine the direction of the nap. Carpet lays down more when you brush your hand in one direction than in other directions. It's incredibly important for proper carpet patching that all the carpet runs the same direction. Sometimes it's really hard to tell which way the carpet nap runs. All I can say is to keep brushing your hand in different directions until you really get to know the carpet. If you keep at it, you'll figure it out.

5. Turn the carpet patch over and use the straight edge to cut a perfect patch from the back. If you are untrained, chances are that you won't be able to cut a perfect patch. (Tip, use a fresh blade in the slotted blade carpet knife) Here at Creative Carpet Repair we're carpet repair experts, we do this all the time so it's easy for us. If the patch isn't cut exactly perfect you'll see the carpet patch.

6. Now that the carpet patch is cut exactly perfect without any gaps or overlaps at the seams it's time to seal the edges. You can seal the edges with latex or with a glue gun. Just use the slightest amount of glue along both edges so that there won't be fraying in the future. Not everyone seals the edges but it is highly recommended.

7. The carpet patch is cut to perfection, the edges are sealed and now you're ready to adhere the carpet patch to the rest of the carpet. The way we do it is to use a special carpet seam tape with an iron or with a hot glue gun. For the beginner I'd recommend using the glue gun.

Cut the seam tape to the size of the carpet patch. Line up the carpet seam tape so that half of it is under the existing carpet and the other half of it will be under the patch.

Use the glue gun to apply a generous amount of hot glue under the seam of the carpet. Slowly work your way all the way around the carpet until you have glued the carpet patch into place. (hint, have a glass of water right next to you for when you get molten hot glue on your fingers. A quick dip will cool it off right away and prevent you from experiencing nearly as much pain.)

When gluing the carpet patch down using the glue gun, pay special attention to the backing. You want to glue the backing down so that it's butted up just right. Also be especially careful to avoid getting the nap of the carpet pushed down into the hot glue. It's a mess when that happens and there's no recovery.

As you glue the carpet together, push the carpet backing down into the hot glue using a carpet tractor. It's a good idea to put a flat weight on top of the seam for a few minutes as you work your way around.

If you're a novice, I wouldn't recommend that you try to use the carpet seam iron to patch a carpet. It takes a skill that doesn't come on the first try. You can get a better idea by watching the free videos that you can find on the main website.

;;
Carpat@Home - Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column